Certificate III in Landscape Construction

Course Code AHC30916
Locations Sherwood Park (Warrnambool), Workplace training
Study Mode Full-time, Apprenticeship
Length 3 years
Commencement Apply any time
Timetable Workplace-based training and assessment
The trainer will visit your workplace four times a year
Course Overview
Introduction

Are you interested in becoming a landscape gardener? Or perhaps you’ve been working in the industry and would like to formalise and enhance your skills

This course will equip you with theoretical and practical skills and knowledge in all aspects of landscape construction.

What will I Learn?

You will learn a variety of skills including retaining wall construction, plant establishment and paving.

Course Outcomes and Career Opportunities

  • Landscaper
  • Gardener

Pathways

Further training pathways from this qualification include Certificate IV in Horticulture.

Course Requirements
Entrance requirements & pre-requisites

You need to be employed in this field with a registered employer before commencing this course. If you are currently not employed in this field please contact the Skills and Jobs centre for further advice on 1300 648 911.

Apprenticeship/Traineeship Entry Requirements

You need to be employed in this field before commencing this course. If you are currently not employed in this field please contact the Skills and Jobs centre for further advice on 1300 648 911.

Course requirements

To be eligible for this qualification you must sucessfully complete 15 units, 11 core units and 4 elective unit.

Units offered

Core Units

Swipe for full table
Unit Code Unit Name Unit Hours Unit Consumables
AHCDRG301 Install drainage systems 50 $0.00
AHCLSC301 Set out site for construction works 50 $0.00
AHCLSC302 Construct landscape features using concrete 80 $0.00
AHCLSC303 Construct brick and block structures and features 100 $0.00
AHCLSC305 Construct stone structures and features 50 $0.00
AHCLSC306 Implement a paving project 100 $0.00
AHCLSC307 Implement a retaining wall project 100 $0.00
AHCPCM302 Provide information on plants and their culture 70 $0.00
AHCPGD301 Implement a plant establishment program 80 $0.00
AHCSOL303 Implement soil improvements for garden and turf areas 60 $0.00
AHCWHS301 Contribute to work health and safety processes 50 $0.00

Elective Units

Swipe for full table
Unit Code Unit Name Unit Hours Unit Consumables
AHCBUS402 Cost a project 50 $0.00
AHCCHM303 Prepare and apply chemicals 70 $60.00
AHCCHM304 Transport and store chemicals 50 $0.00
AHCIRG331 Install pressurised irrigation systems 70 $0.00
Assessment

This course involves accredited units.  You will be required to complete assessment tasks to demonstrate your underpinning knowledge, skills and attributes to meet the course outcomes.  A combination of written, oral and practical assessment strategies will be used in either a classroom, online or workplace environment. 

Where units require demonstration of skills in a workplace environment, you will have the opportunity to do this either in your own workplace (where appropriate), through a practical placement, or by using one of the Institute's simulated workshops/classrooms.  Detailed information about the types, conduct and dates of assessments will be provided in advance.  You will also be provided with information about the opportunity for reassessment and appeal.

After applying

Once you have applied for your chosen course, you will receive a thank you email from South West TAFE with a few steps to help process your enrolment.

Complete a Pre-Training Review
You will receive an email to complete a Pre-Training Review online evaluation. This evaluation helps us tailor your training to suits your needs.

Create or provide a Unique Student Identifier (USI)
A USI is a nationally recognised reference number that provides an online record of your training qualifications gained in Australia.
Create your USI
Already have a USI but can’t remember it? Find your USI

Skills recognition
If you have experience or prior qualifications, you may be eligible to apply for recognition of prior learning and gain credits. You will be asked to provide any relevant Statement of Attainment to support identified credits.

Employer Incentives

The Australian Apprenticeships Incentives Program provides a number of incentives to assist employers who take on an Australian Apprentice, particularly where the Australian Apprenticeship is in a trade experiencing a skills shortage.

Find out more about the incentives available and hiring an apprentice or trainee on the Australian Apprenticeships website.

Fees
Course Fees

Everyone has different circumstances that can affect what you pay and how much you pay. Your fees each year are made up of 2 different elements:

  • Tuition fee
  • Consumables/material fee

There are 3 different rates of tuition fees. Only one will apply to you depending on your eligibility and circumstances. The 3 categories include:

The fees listed below are indicative only and may be subject to change without notice and given individual circumstances. Your actual fees will be calculated based on your individual circumstances at the time of enrolment. Funding made available to eligible individuals by State and Commonwealth Governments. If funding is utilised, this may affect future opportunities to access additional funding in the future. 

Swipe for full table
Student type Indicative Course Fee
Government subsidised rate (if eligible) $2,875.00
Concession rate $575.00
Full fee rate (if not eligible for govt subsidy) $16,995.00
Swipe for full table
Fee type Indicative Course Fee
Maximum Consumable/Materials Fee $75.00
Maximum Consumables/Materials Fees

You may be required to pay the cost of some goods or materials necessary for your course, eg: tools of the trade, uniform and books. The maximum consumables/materials fees are made up of course consumables, core unit consumables and the maximum elective units you will pay.

Final costs will be determined at enrolment and you will be informed of the fees associated with course consumables and resources via your Statement of Fees. 

Which fee applies to me?

Government-subsidised rate - Skills First
You could be eligible for a government-subsidised rate depending on your age, educational history, and citizenship or residency status. If you are eligible, the government will contribute to the cost of your training.
Check your eligibility

Skills First Exemptions
As a Victorian Government TAFE, South West TAFE is able to provide exemptions for prospective students. Contact our Customer Service Team to find out if you are eligible for an exemption.

Concession rate
If you are eligible for a Skills First government-subsidised place and hold a current healthcare or pension card, that you can provide at enrolment. You may be eligible for the concession rate. 
Find out more about concession rates

Full fee rate
If you are not eligible for a Skills First government-subsidised place, exemption, concession or are enrolling in a course that isn't government-subsidised, you may be required to pay the full fee rate. 

FIND OUT MORE ABOUT FEES AND ELIGIBILITY

How do I pay my fees?

Once we have processed your enrolment form, you will receive an email with your invoice.

You have three options when organising your payment:

  1. Upfront payment - can be made over the phone with EFTPOS
  1. Payment plan - can be directly debited from your bank account, debited from your Centrelink payments or via a VET Student Loan (for diploma or advanced diploma courses only)
  1. Paid by employer, school or job network agency - if your fees are being paid by your employer, school or job network agency, you will need to complete an Authority to Invoice form.

Payments will need to be arranged within five(5) business days of receiving the email containing your invoice.

We also offer a range of scholarships each year which you may be eligible to apply for to assist with course fees.

Next Steps
Careers and Course Advice

Not sure which course is right for you? South West TAFE will help you find your way.

Our Pathfinders Skills and Jobs Centre is here to support you. Whether you’re exploring career options, transitioning from school to the workforce or looking to study after school we’re here to help you. Call, email or drop in.

Call 5564 8515 or email skillsandjobscentre@swtafe.edu.au

How to apply

There are five simple steps to apply for a course with us.

  1. Apply - complete a short online application form. Once this form is submitted we'll send you a thank you email.
  2. Get ready - your thank-you email will contain links to a pre-training review, to a unique student identifier and to government-subsidised training eligibility.
  3. Chat with your teacher - your teacher or course specialist will contact you about your Pre-Training Review outcomes and additional course information.
  4. Enrol - after chatting with your teacher, you will receive an email with your enrolment form and a link to verify your identity.
  5. Sign - once you've completed your enrolment, you will receive a declaration form to review and sign.

If need any assistance with applying, contact our Customer Service team on 1300 648 911 or visit your nearest campus.

Student Support

As a SWTAFE student, you can access a variety of support services that will enhance your study experience and help you complete your studies successfully. For more information about any of these services, visit our student page.