Certificate II in Plumbing (Pre-apprenticeship)

Free TAFE course
Course Code 22304VIC
Locations Warrnambool
Study Mode Full-time, On Campus
Length 6 months
Commencement March & July 2020
Timetable 3 days a week
Course Overview
Introduction

Seeking a career in the plumbing industry? This plumbing pre-apprenticeship provides you with the ideal starting place.

This pre-apprenticeship will provide you with the basic skills and knowledge required to kick-start a career in the plumbing industry and will give you a pathway to gaining a plumbing apprenticeship. 

During this course, you will learn about working safely and effectively in the workplace and you will gain hands-on skills and knowledge in using hand and power tools, welding and cutting, and using plumbing pipes, fittings and fixtures to simulate plumbing installations.

What will I Learn?

During this course, you will gain skills and knowledge including:

  • OHS in the construction industry
  • How to produce technical drawings
  • Fabricate simple pipe systems
  • Perform basic welding and cutting
  • Using plumbing hand and power tools
  • Using plumbing pipes, fittings and fixtures to simulate plumbing installations

Course Outcomes and Career Opportunities

Upon successful completion, you will have the skills to continue further study in the Certificate III in Plumbing as an apprenticeship.

Pathways

This course provides a pathway to completing a plumbing apprenticeship or pursue a career in the trade industry.

Information Session

Why don’t you come along to our next course info session to find out everything you need to start your learning journey? You can chat with our teachers, tour our facilities, learn more about the course, find out about the application process and get your questions answered by our course experts. 

Find the next info session near you

Course Requirements
Course requirements

To be eligible for this qualification, you must successfully complete 19 core units.

Units offered

Core Units

Swipe for full table
Unit Code Unit Name Unit Hours Unit Consumables
BSBWRT301 Write simple documents 30 $20.00
CPCCCM1015A Carry Out Measurements And Calculations 20 $0.00
CPCCCM2001A Read And Interpret Plans And Specifications 36 $0.00
CPCCOHS1001A Work Safely In The Construction Industry 6 $70.00
CPCCOHS2001A Apply OHS Requirements, Policies And Procedures In The Construction Industry 20 $0.00
CPCPCM2039A Carry out interactive workplace communication 10 $0.00
CUVACD303A Produce technical drawings 50 $0.00
HLTAID002 Provide basic emergency life support 12 $40.00
VU21789 Apply basic sheet metal practices 50 $0.00
VU21790 Cut and penetrate building materials and structures 30 $0.00
VU21791 Fabricate simple plumbing pipe systems 30 $0.00
VU21792 Identify career pathways in the plumbing industry 30 $0.00
VU21793 Perform basic oxy-acetylene welding and cutting 20 $0.00
VU21794 Prepare to work in the plumbing industry 20 $0.00
VU21795 Use and apply basic levelling equipment for plumbing 8 $0.00
VU21796 Use basic electric welding equipment and techniques 20 $0.00
VU21797 Use basic plumbing hand tools 50 $0.00
VU21798 Use basic power tools 20 $0.00
VU21799 Use plumbing pipes, fittings and fixtures to simulate plumbing installations 30 $0.00
Assessment

This course involves accredited units.  You will be required to complete assessment tasks to demonstrate your underpinning knowledge, skills and attributes to meet the course outcomes.  A combination of written, oral and practical assessment strategies will be used in either a classroom, online or workplace environment. 

Where units require demonstration of skills in a workplace environment, you will have the opportunity to do this either in your own workplace (where appropriate), through a practical placement, or by using one of the Institute's simulated workshops/classrooms.  Detailed information about the types, conduct and dates of assessments will be provided in advance.  You will also be provided with information about the opportunity for reassessment and appeal.

Skills Recognition

Your current skills, knowledge and experience can contribute to help you get a qualification. Learn more about skills recognition and how it may benefit you here.  

Pre-training review

The pre-training review assists SWTAFE staff to determine whether this course is the most suitable for you at this time, and also identify any support needs you may require once you commence your studies. It takes about an hour to complete. Once you apply for your chosen course a link to the pre-training review will be emailed to you.

Unique Student Identifier

If you are studying nationally recognised training in Australia, you are required to have a Unique Student Identifier (USI). Your USI links to an online account that contains your training records and results for training completed from 1 January 2015 onwards. One of the main benefits of the USI is the ability to provide you with easy access to your training records and results throughout your life and this will assist you when applying for a job or enrolling in further study. You are required to have a USI at the time of enrolment – especially if you want to use VET Student Loans to defer your fees. To apply online or get more information go to www.usi.gov.au.

Fees
Course Fees

Everyone has different circumstances that can affect what you pay and how much you pay. Your fees each year are made up of 2 different elements:

  • Tuition fee
  • Consumables/material fee

There are 3 different rates of tuition fees. Only one will apply to you depending on your eligibility and circumstances. The 3 categories include:

The fees listed below are indicative only and may be subject to change without notice and given individual circumstances. Your actual fees will be calculated based on your individual circumstances at the time of enrolment. Funding made available to eligible individuals by State and Commonwealth Governments. If funding is utilised, this may affect future opportunities to access additional funding in the future. 

Swipe for full table
Student type Indicative Course Fee
Government subsidised rate (if eligible) $2,685.00
Concession rate $540.00
Full fee rate (if not eligible for govt subsidy) $8,300.00
Swipe for full table
Fee type Indicative Course Fee
Maximum Consumable/Materials Fee $310.00
Maximum Consumables/Materials Fees

You may be required to pay the cost of some goods or materials necessary for your course, eg: tools of the trade, uniform and books. The maximum consumables/materials fees are made up of course consumables, core unit consumables and the maximum elective units you will pay.

Final costs will be determined at enrolment and you will be informed of the fees associated with course consumables and resources via your Statement of Fees. 

Which fee applies to me?

Government-subsidised rate - Skills First
You could be eligible for a government-subsidised rate depending on your age, educational history, and citizenship or residency status. If you are eligible, the government will contribute to the cost of your training.
Check your eligibility

Skills First Exemptions
As a Victorian Government TAFE, South West TAFE is able to provide exemptions for prospective students. Contact our Customer Service Team to find out if you are eligible for an exemption.

Concession rate
If you are eligible for a Skills First government-subsidised place and hold a current healthcare or pension card, that you can provide at enrolment. You may be eligble for the concession rate. 
Find out more about concession rates

Full fee rate
If you are not eligible for a Skills First government-subsidised place, exemption, concession or are enrolling in a course that isn't government-subsidised, you may be required to pay the full fee rate. 

Find out more about fees and eligibility

How do I pay my fees?

Once we have processed your enrolment form, you will receive an email with your invoice.

You have three options when organising your payment:

  1. Upfront payment - can be made over the phone with EFTPOS
  1. Payment plan - can be directly debited from your bank account, debited from your Centrelink payments or via a VET Student Loan (for diploma or advanced diploma courses only)
  1. Paid by employer, school or job network agency - if your fees are being paid by your employer, school or job network agency, you will need to complete an Authority to Invoice form.

Payments will need to be arranged within five(5) business days of receiving the email containing your invoice.

We also offer a range of scholarships each year which you may be eligible to apply for to assist with course fees.

Next Steps
Careers and Course Advice

Not sure which course is right for you? South West TAFE will help you find your way.

Our Pathfinders Skills and Jobs Centre is here to support you. Whether you’re exploring career options, transitioning from school to the workforce or looking to study after school we’re here to help you. Call, email or drop in.

Call 5564 8515 or email skillsandjobscentre@swtafe.edu.au

Apply Now

Apply now for a place in our next course intake. Places for courses are limited, so it’s best to get in soon so you don’t miss out. You’ll need to complete an application form  which you can do online here or by speaking with our Customer Service team.  We invite you to come and see us at one of our campuses in Warrnambool, Colac, Portland or Hamilton and a team member will ensure you are taken care of.

If you have any questions regarding the application process please chat to our Customer Service team on 1300 648 911.

Student Support

As a SWTAFE student, you can access a variety of support services that will enhance your study experience and help you complete your studies successfully. For more information about any of these services, visit our student page.